中文站
- Product name：SP201 Ultrasonic Spraying Device
- Category：SLT Spraying Equipment
- Back to list
SP201 Ultrasonic Spraying Device
It uses ultrasonic atomization theory to achieve up to 90% utilization ratio of sizing agent.
High uniformity of sizing agent spraying can assure its stability and repeatability of sample manufacturing, which is very suitable for research and development of fuel cell MEA and catalyst etc.
SP202 Spraying Device is composed of precision motion control module, ultrasonic spraying module, precision injection pump and vacuum heating platform etc. and it uses desk-type design to make its structure compact and reasonable, thus entire device is just same as a common printer, which can be placed conveniently on the draught cupboard, laboratory table etc.
It can be used in university and research institute etc.
Features:
1,Spraying nozzle spraying effects uniformly, flow rate control accuracy, not easily blocked, anti corrosion, high precision and high controllability.
2,This model has the function of automatic reverse, which can achieve the continuous production.
3,This device uses the spraying of 3-axis multiple combination, which can achieve multi-directional spraying of different angle, different direction and different height etc.
It is no blind spot for spraying, and all automatic spraying, combination mode of manual, inching and point to point spraying for option, which can increase drastically stability and testing efficiency.
4,Nozzle upper of the device has the function of infra-red heating, which can heat and drying from the upper of the product, thus can decrease the dependency of the bottom heating.
5, This device has the accurate position system, which can accurately position the start-end of the spraying.
6,Control parts uses Japanese Mitsubishi brand-PLC, which can assure working stably and reliably.
7,The device uses humanized interface which can show the device info at real time, together with rich functional key, can all make the operator operate conveniently.
Technical Data:
Environmental Condition d | Items | Parameters |
Cylinder Working Pressure | 0.50-0.80 MPa | |
Environment Temperature | 0-55℃ | |
Environment Humidity | 10-85% | |
Anti-vibration | 10-25Hz(X,Y,Z direction 30min respectively) output material | |
Anti-interference | 1000Vp-p | |
Surrounding Air | No Corrosive Gas | |
Electric Specs
| Power Supply Voltage& frequency | Single Phase AV 220V 50Hz |
Maximum Consumption Power | ≤4kw | |
Ground Resistance | <100Ω | |
Working Control Voltage | DC/24V | |
Structure Parameters | Spaying Active Area | 400*400mm |
Cast Alu Heating Specs | 400*400*25mm | |
Size | 1100*1000*1600mm | |
Weight | 300kgs | |
Spaying Parameters | Maximum Spraying Speed | 0-30000mm/min |
Maximum Spraying Qty | 25l-500l/times | |
Repeat Position Accuracy | 0.01mm | |
Flow Setting Range | 0.01ml/min—30ml/min | |
Flow Setting Accuracy | ≤±1.50% | |
Flow Repeat Accuracy | ≤±1.50% | |
Gas Working Pressure | ≤±1.50% | |
Medium Status | Weak corrosion | |
Medium Viscosity | ≤50㎜²/S | |
Heating Temperature | 25-120% | |
Heating Accuracy | ±1 |
Special Accessories:
Supplying a set of spraying tool special purpose for fuel cell with this device.
Supplying pressure regulating joint, hexagonal socket, spanner etc.
Application:
MEA Preparation of PEM fuel cell and Direct Methanol fuel cell etc.
Solar Cell category.
Other spraying category of medium viscosity less than 50㎜²/S.
