中文站
- Product name：Small Thermal Evaporation Coater
- Category：Solar Equipment Series
- Back to list
Small Thermal Evaporation Coater
This equipment is a small desktop program temperature control evaporation coating instrument. The program can be set to accurately control the temperature from 200 ° C to 1500 ° C (or 1200 ° C to 1700 ° C), Film samples with maximum diameter of 2 inches can be Evaporated, the sample table can be rotated to make more uniform films.
It is widely used in the electrodes preparation and organic LED.
Main characters:
6 inch quartz vacuum chamber, easy to clean and set samples
Install 2 inches sample table, the sample table can be rotated to make films more uniform.
Adopt tungsten wire basket as heat source, the max temperature can reach 1700 ℃, adopt special alumina boat which can process the sample below 1600 ℃. If the evaporation temperature is higher than 1600 ℃, the sample should be directly placed in the tungsten wire basket.
Accurate temperature control: set up 30 – section heating and cooling procedures, temperature control accuracy is + / - 1 ° C
v Main technical indicators
Temperature Control and Heating Source | *Adopt Tungsten as the heating source, equipped with a special alumina crucible. The thermocouple is installed at the bottom of the crucible to facilitate temperature measurement and control. *Adopt S-type thermocouple, work temperature is 200℃-1500℃, * Adopt A temperature controller with digital display, can set up 30 – section heating and cooling procedures, and the temperature control accuracy is + / - 1℃ *Manual adjustment can be converted with no thermocouple, directly adjust the output I manual, the heating source temperature will reach 2000℃, can realize the tests of sample coated with carbon |
Sample Table | *The sample table is mounted on the top of the instrument, Diameter is 50mm, *Sample table can be rotated and speed is 5rpm, *Distance of sample table and the steam source can be adjusted, adjusting range:60mm-100mm |
Vacuum | *Vacuum interface is KF40（Connected with vacuum pump） *Equipped with a digital display anti-corrosion vacuum gauge-PCG554, Measuring range: 3.8x10-5-1125Tor |
Air Intake | *Air intake is 1/4NPS, Inert gas can be set into the vacuum chamber, clean the cavity, The reaction gas can also be set in to evaporate *Install needle valve at inlet, used for adjustment of air intake flow. |
Optional | *Mechanical pump with oil filter, vacuum degree is <10pa, It can evaporate precious metals such as Au, Ag, Al, etc *High vacuum can be obtained by molecular pump, vacuum degree<10pa, it can evaporate easily oxidized material such as Al, Mg, Li *In order to get the best film strength, suggest that clean the substrate by using plasma cleaning machine before evaporation |
Overall Size | 440mm*330mm*520mm(length x width x height) |
v Why choose us?
（1）Kunshan Sunlaite has a small test line of perovskite solar cells, we have rich experience in preparation of perovskite solar cells;
（2）Our equipment is optimized and customized according to the problems in the actual use of perovskite solar cell small test line;
By choosing us, you have not only chose a device, but also a set of high-quality perovskite materials and a set of preparation technology for solar cells.
We provide "Equipment + solar cell preparation technology scheme + solar cell preparation materials" , it is integration scheme, kill three birds with one stone!”
